I’ve decided to sell my driver/project to finance another project. Today was the first time I’ve driven the car in 8 months (was deployed overseas for a while) and it reminded me how much I love this thing. Every time I drive this car after I instantly regret the idea of selling it. It’s not easy for me to put this up for sale but priorities are priorities.
I purchased this vehicle in a three years ago from California with a blown head-gasket, paint was scorched and with diving board bumpers.
First order of business was tearing into the engine to get it running correctly. I pulled the head off, had it inspected/tested and resurfaced. Also, had a valve job done including seals. All parts used are listed below. It ran like a champ afterwards.
Next up was getting rid of the automatic. All parts listed below were changed in the process. New clutch, resurfaced flywheel, rebuilt slave and master cylinders, u-joint driveshaft, new motor mounts, trans mounts, CSB and guibo. The auto gearing on the LSD with the 5-speed is a phenomenal combo.
Stripped it down for paint and had it redone in Diamond Schwartz. Fairly good paint job, only a couple imperfections (some VERY faint tiger stripes on hood, sanding marks under the clear in a spot or two) but you’d have to look very close to see them. It’s obviously not a “Concours” car, more like a VERY good-looking weekend/daily-driver on the outside. Tons of new gaskets. Door handles and trim was powder coated black. Classic Euro Parts repro euro bumpers were painted to match the body.Also, added Euro headlights/grill. M5 valance, fogs, turn signals and lip. Blacked out chrome in rear lights. New roundels.
No trades or payment plans. Cash only.
The reserve is generously low.
Offers accepted for early termination of the auction but lowballs will be ignored.
Shipping at your expense and arrangement.
Basics:
1987 BMW 535is
Diamond Schwartz
Beige
5-Speed Manual (swapped)
164k (may go up a little as I love driving the thing)
OEM LSD Rear Diff
Rebuilt top end
Paint 3 yrs old
Almost ZERO rust
Not so great:
- Sport seats leather isn’t good. They’re currently covered with vinyl covers.
- Rear seat is black (I'll include the stock beige rear seat, it's a little tattered but useable)
- Dash isn’t good. Currently has a dash cover
- Slight PS/Hydroboost leak. Barely noticeable but in full disclosure.
- Exterior temp sensor busted. Replacement sensor included.
- Antenna mast busted by a car-wash. Motor works. Hole is plugged up. I'll include a new mast.
- M5 Fogs have cracked lenses. Can't really notice but in full disclosure, they're not perfect.
- Idles a TINY bit lumpy but these engines aren't known for their smooth idle. Every M30B34I've owned has idled the same.
- A few little things here and there but overall a VERY solid, great looking, great driving, great running car.
The good:
- Freshly detailed (literally hours ago from posting this). The detailer's steamer broke so he wasn't able to clean the engine bay so please keep in mind the engine wasn't cleaned unfortunately. It's a little dusty from sitting for a while.
- A/C blows cold (recharged with R12 with a new drier)
- TONS of new parts
- Drives amazingly
All items below installed at 159k. A few were mentioned above. I used genuine BMW parts as much as possible (or as much as made financial sense). I have a spreadsheet with all part numbers used and the purchase source located:
https://drive.google.com/file/d/1xa0qh7qKwZx8O1rBIPdZYID1Vl7SaoRS/view?usp=sharing
Pilot Bearing
Crankshaft Seal Shim
Bolts - Clutch Pressure Plate to Flywheel
Transmission Cross Member
Hose - Reservoir to Clutch Master Cylinder
Flywheel Bolt
Crankshaft Seal
Spring for Throw-out Bearing
Pivot Pin for Throw-out Bearing
Distributor Cap
Ignition Rotor
Fork Lever
Valve Cover Gasket
Exhaust Manifold Gasket
Flex Disc for Driveshaft
Rear Crankshaft Seal
Driveshaft Center Support Bearing
Clutch Release Bearing
Oil Filter; Cartridge Style
BoschSilver Spark Plugs
Door Lock Cylinders
Shifter Arm Bracket
Clutch Slave Cylinder Repair Kit
Clutch Master Cylinder Repair Kit
Head Gasket Kit
Head work (Inspected/tested/surfaced/valvejob’d/ect)
Motor Mounts
Exhaust Manifold Studs
Exhaust Manifold Nuts
Exhaust Studs
Exhaust Nuts
Head Bolts
Thermo Valve
Injector Rebuild/Flow Service
Injector Plugs
Manifold Heatshields
Center Console (Used)
Shift Boot (Used)
Exhaust Hangers (Front)
Exhaust Hangers (Rear)
Coolant Level Sensor
M5 Fog Lights
Roundel (Front)
Roundel (Rear)
Roundel Grommet (4)
Selector Shaft Seal
Reverse Light Switch
Output Shaft Seal
Euro Bumper Mounts
Front/Rear Euro Bumpers (Reproduction Fiberglass)
Euro Signals
M5 Lower Valience
Headlights H4/H1
Euro Headlights
Windshield Weatherstrip (F)
Windshield Weatherstrip (R)
Windshield lockstrip (2ea)
Window Lower Strip (RL)
Window Lower Strip (RR)
Window Lower Strip (FR+FL)
Foglight Covering Right
Foglight Covering Left
All New Headlight Hardware
Headlight Bucket Powder Coat
Door Moulding F/L
Door Covering F/R
Door Covering F/L
Door Moulding R/L
Door Covering R/L
Door Covering R/R
Door Covering R/L
Euro Front Valance
Coolant Temp SensorLeather Shifter Boot