1969 Chevy K20 Roller Project with 6.0/4L80e Drivetrain

Price: Ask a price!
Make: Chevrolet
Model: C/K Pickup 2500
Year: 1969
Mileage: 1
VIN: ks249t842848
Color: Gray
Drive type: 4WD
Options: 4-Wheel Drive
Vehicle Title: Clear
Location: Ballston Lake, New York, United States

Description

This is a 1969 Chevy 3/4 ton long bed single cab pickup. It currently has no drivetrain and is just a rolling body and frame. It's in very good shape, does need some patch panels on lower doors, lower fenders, cab corners and small pieces in cab floor and rear bed floor. With just these few patch panels this truck would be perfect sheetmetal wise. It has 14 bolt FF rear end and Dana 44 hd front axle with 4.11 gears i believe, the front axle is missing the axles themselves. The truck has a roll cage and 3-4" inches of lift. It has a 2 inch body lift and upgraded leaf springs. The bed is a fullsize 8 foot bed and it is in excellent shape, there is maybe one or two small spots in the floor that are thin and could use patches, but the structure is solid. The frame is good and solid. It has ladder bars in the rear currently. Glass is all in good shape and windows function (manual windows/locks). The interior is stripped, dash pad is present but no gauges in dash (there are gauge pods). It has no carpet. It comes with just rollers for wheels. Very solid project for a real american made truck with thick steel panels.

As you can see this is a package, as i was going to swap a 6.0 ls engine into it with a 4l80e and np263. So included in this is the whole drivetrain i was going to install in it. I have everything you need to swap it in. They are all out of a running/driving 2003 silverado 2500hd. Its a 6.0 engine with dbw throttle, a 4l80e and a np263 all with only 115k miles on them. This also comes with the wiring harness and computer, all accessories on the front of the engine, cooling fan and clutch, starter, exhaust manifolds, o2 sensors, driveshafts, radiator, throttle pedal and tac module, dash controls for the 4 wheel drive, gas tank, rear view mirror with electronics, ac evaporator, radiator and more.
Also included in this package would be the bucket seats out of the same 2003 pickup, they are tan cloth seats in good shape with one small rip in drivers side. I also have a seat of aluminum 8 lug turbine wheels that will go with this. Finally I have a set of LS engine adapter mounts for mounting the engine in the pickup.

This trucks has the front fenders, clip and hood off as seen in the first picture. Upon sale this would be bolted back together. The drivetrain is all bolted together as seen in the pictures. I will not ship, but if shipping is arranged i will assist in loading the vehicle, however it obviously does not run, so a trailer with a winch will be needed. The truck rolls and steers fine. The drivetrain could be palatized for shipping but that would need to be discussed and would cost extra. I reserve the right to remove this auction if a local sale goes through. The truck is available to be viewed and I would encourage potential buyers to come look at the truck and drivetrain before bidding, because no refunds will be offered once the auction has ended.
Thank you for your time and any questions I will be happy to answer.

More Chevrolet classic cars for sale