1986 Chevy Camaro Z28

Description

Letting go of my project Z28. It's a solid car that I've been working on, but have decided to let go. The car runs pretty strong as it sits, but could use a little TLC here and there with replacement of some parts (shocks, bushings, etc)... I've replaced the carpet and installed sound deadening throughout the passenger cabin. The interior is pretty decent but the drivers seat has signs of wear with a couple of small punctures as u can see in the pics. The dash has a couple of cracks, hence the dash cover. The AC is not functional right now. The compressor bracket is needed so the compressor can be mounted and hooked up. The windows work, albeit somewhat slow on the up side. The drivers side power seat works. The wheels polish up pretty good, but have some pitting near the center hub and the gold trim could use some touch up. The rubber seals around doors and t-tops should be replaced as they sometimes leak, and are just old in general. The rear trunk pull down isn't working properly, so I have it disconnected at this time. I was told by previous owner that he pulled the original 305 motor and replaced it with a 350 from an 87' Vette and adding a mild cam, injectors, and an aftermarket fuel pressure regulator in the process. I'm sure my forgetting other small things about the car, so feel free to ask any questions.