1965 Chevy C10 pickup truck with air ride

Description

1965 Chevy C10 pickup truck short box step side

This truck was a true garage find. It sat in the same garage from 1996 till I pulled it out February on this year. It has a 1973 250 in-line six cylinder engine with a three speed standard transmission converted to the floor shifter with cool shift knob and boot.

Truck came from the south! Very good shape for the year. See pictures of interior. Need carpet and some seat work. The truck only was about five hundred miles on it.

Bed of truck was a very cool cargo trunk. Plywood bed floor.

List of new parts

Engine

starter, fuel pump, valve cover gasket, plugs, points, condenser, rotor, cap and wires

Interstate battery, new battery ends

Upper radiator hose with thermostat

Front Brakes

New CPP front power disc brakes, 2 1/2" drop spindles, master cylinder with booster and portioning valve. all new brake hose and brake lines

Rear brakes

compete new drums, shoes, wheel cylinders and spring kits.

New brakes hoses and lines

new complete e-brake cables

Front end

all new upper and lower control arms, ball joints and tie rods ends

Upper and lower air plates

Air bags

New shock mounts

New shocks

Rear end

New five bolts axles, bearings and seals

End cover gasket and gear oil

New CPP adjustable pan hard bar

two inch lowering blocks with u-bolts

upper and lower shock mounts

New shocks

New CPP c-notch plates

Air bags

Gas tank

New in bed 17 gallon tank with sender and boat type filler

all new fuel and vent lines

Four corner air ride system

You can control all four wheels, two gauges with four air switches, five gallon tank and compressor mounted under the right side of cab.

Wheels and tires

All new Coker 3 1/8 wide white tires

Four new old stock GM steel wheels

New lug nuts and valve stems