1968 Chevelle Malibu Project needs finishing

Description

Here is the work that's been done thus far, the parts that I have, the parts and work that it needs for the project to be completed.

Brakes:

Thecars has drum brakes in the rear and disc brakes on the front. It has new brake lines installed from the rear through the front of the car. The master cylinder and the brake booster have been rebuilt. The master cylinder and the brake booster have to be installed, connected to the brake lines and bled. The brake pedal has to be installed. The emergency brake.cable, emergency brake pedal have be installed and adjusted.

Electrical:

I purchase an American Wire harness set for the car. The wire harness needs to be installed. Also all the lights, gauges and engine wiring has to be done.

Al the lights, rear light, side lights, headlights, signal lights, license plate and the center dome interior lights have be wired and installed.

I have original gauges and speedometer that came with car along with the original instrument cluster. The instrument cluster can be used, however the cluster has a crack and its faded so I was going to buy a new cluster, speedometer and gauges with a tach and have that installed.

The rear lights casings are there but need to be refurbished.

It will need new headlights and bulbs for the interior and exterior of the car.

Heater:

The car never came with air condition. My plan was to leave as it came without it. I do have a new heater core,blower. I have the original heater controls which have to be installed.

Gas tank:

Have a new gas tank and brackets that need to be installed. The car has all new gas lines all ready installed.

Engine and Transmission:

I was planing to use a small block 350 with an original power glide transmission. I havethe 350 that I sent you pictures of and a freshly built power guide transmission that's is capable of handling over 400 HP ready to be installed. I have new motor and transmission mounts.

I have all transmissions linkages and cooling lines. I have the original driveshaft that needs to be rebuilt. I have the original cross member.

I have the gas pedal and the Carburatorlinkages that initially came with the car.

Cooling:

I have a brand new radiator with new hoses and heater hoses. The engine needs a new thermostat and a fan.

Exhaust:

You saw the exhaust manifolds on the engine, the car will need a complete exhaust system.

Interior:

I have the complete original interior, the headliner, front and rear seats, rear driver and rear passenger arm rests,door cards and window regulators and window cranks. Front driver and rear passenger arm rests,door cards and window regulators and window cranks. All need to be installed. The seats have to be reupholstered. I have the sound deadening and heat shield brand new especially made for a Chevelle that needs to be installed. Plus the carpet needs to be purchased.

Glass:

The windshield and the rear window are brand new and professionally installed. The rear side windows were redone. The front side window and the side vent windows have to be redone.All have to be installed.

Crome:

Bumpers have to be recromed and installed, mirrors. Door handles, cylinder lock rings have to recromed and installed.

It's going to need new mirror and brand new molding all around.

I have the front grill which is in good shape, have all the screws for the lights and grill, brand new that need to be installed.

Suspension:

Completely brand new suspension allaround.

Steering:

I had the original steering column rebuilt and painted to the cars color, it also has a rebuilt period correct steering column wink hat need to be installed.

Stereo system:

Needs a new stereo system with speakers and wiring that needs to be purchased and installed.

It will need new tires and wheels.