1972 dodge dart swinger Mopar Slant Six 225 Classic Old School

Description

I have an unrestored and 95% original 1972 Dodge Dart Swinger with the slant six 225. This car is a great driver as i drive it everyday to and from school and work which is about 50-60 miles a day and it has never given me an issue. This car has all the necessities you could want. It has power steering, cold a/c, hot heat, power windshield wipers. Everything on this car works as it should all the way down to the door buzzer and windshield washer pump. This car is truly a survivor and always gets looks. Since i have owned the car the a/c system has all been replaced and changed to r134a. This includes the compressor, drier, expansion valve and the pressure switch. It has a brand new voltage regulator and ballast resistor. One of the only two reasons this car isnt 100% original is the fact that I replaced the points distributor with an 1973 dart electronic ignition system which included a brand new ecm and distributor. The reason i did this was to make it more driver friendly. The second and last reason this car isnt 100% original is the fact that i installed a set of 14 inch dodge rally wheels with new bf goodwrench ta tires. I have also rebuilt and tuned the carb for the best performance and reliability. This car is truly remarkable and yes you read that right it only has 60k miles on it. The car also has the build sheet from the factory behind the back seat. I have also installed a bluetooth radio under the driver side of the front seat and installed two 6x9 polk audio speakers. The car will come with a brand new black top as i was going to change it out. The windows are also tinted 25% all the way around. The only really bad about this car is that there are two major blemishes on the paint and the armrest on the driver door is cracked but you can get one cheap to replace it. If you are interested i do have a 318 magnum motor than can go with the car for a little extra. The magnum motor only has 70k miles on it ad will come with all accessories and computer and wiring harness to retain the fuel injection. If you have any questions or want any more pictures just let me know and i will try to help.