1967 Mustang Clean title, straight body, no rust.
1998 Cobra 4.6 Teksid Engine
5 speed T45 Transmission
MSD high performance coil packs
BBK under drive pullies
Ford racing Shorty headers
New magna flow x-pipe and 40 series flow masters
BBK mass air intake
Heidts Mustang II front suspension
Heidts 4 link coilover rear suspension
All new bushings
2004 mustang cobra Front brakes with 13” slotted rotors braided hoses and new pads
1994 mustang GT posi 3.75 gear rear end with new slotted Rotors, braided lines and new pads.
Driveline cut to size and balanced.
Mustang Steve brake & clutch pedal assembly with clutch Cable, Late model Master Cylinder
New booster and proportioning valve
Tank inc Fuel injection Tank with Walbro G series in- tank fuel pump for engines up to 650hp
AN fittings though out with braided pressure hoses. System is pressurize with no leak or issues.
Brand new American auto wire complete harness
Ron Francis Telorvek harness to run the engine with OBD II connector under the dash and inertia switch in the trunk
Dakota Digital Dash
All new lights inside out, tail lights, head lights back up light etc.. they all work like they should.
Brand new custom interior with 98 Electric driver seat
Power windows
Car is sprayed Stealth Grey Metallic code: WA928L
New billet grill and grill support
Dina-pad firewall pad
Sound deadening inside entire cabin and trunk are with new carpet
New aluminum dash trim, new seal plates, new front and rear bumper, new chrome window seals, new windshield and rear window.
New Flaming rivers Stainless steel steering column
American racing Shelby style wheels VN427 with new tires all around.
Shelby style fiberglass hood
im sure im forgetting a lot of things…
Purchased the car 3 years a go with the swap already done was a project at the time and I finished it with all new parts.
I have lost interest in the car I start it and drive it around the block every now and then but mostly sits in my garage.. I own 5 other car and this needs to go to a person who can enjoy it and not sit around.
Things that need attention or I would change: the hood doesn’t line up properly its a fiberglass hood I'm sure it can be adjusted but I haven’t had time to look into it and never really bothered me, power windows go up and down but sometime they have a hard time going up I would just swap them with manual ones. Paint is good but is not show quality. It could use a taller gear maybe a 4.10 kept it how it is cause I was planning on putting a supercharger but never got to it.
Car is sold as is if you have any question please don’t hesitate to contact me.
On Jan-28-19 at 20:46:21 PST, seller added the following information:1967 Mustang Clean title, straight body, no rust.
1998 Cobra 4.6 Teksid Engine
5 speed T45 Transmission
MSD high performance coil packs
BBK under drive pullies
Ford racing Shorty headers
New magna flow x-pipe and 40 series flow masters
BBK mass air intake
Heidts Mustang II front suspension
Heidts 4 link coilover rear suspension
All new bushings
2004 mustang cobra Front brakes with 13” slotted rotors braided hoses and new pads
1994 mustang GT posi 3.73 gear rear end with new slotted Rotors, braided lines and new pads.
Driveline cut to size and balanced.
Mustang Steve brake & clutch pedal assembly with clutch Cable, Late model Master Cylinder
New booster and proportioning valve
Tank inc Fuel injection Tank with Walbro G series in- tank fuel pump for engines up to 650hp
AN fittings through out with braided pressure hoses. System is pressurize with no leak or issues.
Brand new American auto wire complete harness
Ron Francis Telorvek harness to run the engine with OBD II connector under the dash and inertia switch in the trunk
Dakota Digital Dash
All new lights inside out, tail lights, head lights back up light etc.. they all work like they should.
Brand new custom interior with 98 Electric driver seat
Power windows
Car is sprayed Stealth Grey Metallic code: WA928L
NewScottdrakebillet grill and grill support
Dina-pad firewall pad
Sound deadening inside entire cabin and trunk are with new carpet
New aluminum dash trim, new seal plates, new front and rear bumper, new chrome window seals, new windshield and rear window.
New Flaming rivers Stainless steel steering column
American racing Shelby style wheels VN427 with new tires all around.
Shelby style fiberglass hood
powersteering, No A/C,Doesn't have a Radio.
im sure im forgetting a lot of things…
Purchased the car 3 years a go with the swap already done was a project at the time and I finished it with all new parts.
I have lost interest in the car I start it and drive it around the block every now and then but mostly sits in my garage.. I own 5 other car and this needs to go to a person who can enjoy it and not sit around.
Things that need attention or I would change: the hood doesn’t line up properly its a fiberglass hood I'm sure it can be adjusted but I haven’t had time to look into it and never really bothered me, power windows go up and down but sometime they have a hard time going up I would just swap them with manual ones. Paint is good but is not show quality. It could use a taller gear maybe a 4.10 kept it how it is cause I was planning on putting a supercharger but never got to it.
Car is sold as is if you have any question please don’t hesitate to contact me.