1965 GMC 1 ton

Description

For sale is a 1965 GMC Truck project. I bought it some 18 months ago and now I’m giving up due to lack of time & space. A lot is done already, but it still needs plenty more hours to be back on the road. Here’s a list of what’s done already and what will be included with the sale. As I’m going trough the boxes there will be some more parts that are not listed here as I have lost some of the invoices.

FRAME / CHASSIS:

- Frame sandblasted and painted

- 1972 Chevy Crossmember with Power Steering

- Rebuilt 12 bolt Rear End with New 5 lug Axles / 3.73:1 Non posi

- Front & Rear slotted & drilled Disc Brakes w/built in E-brake

- Completely Rebuilt Front Suspension

- Western 2.5” Drop Spindles

- 2” Drop Spring

- Every Suspension / Steering Part has been replaced with MOOG components

- 2.5” Z’d frame

- Porterbuilt bolt-in notch

- Modified Leaf Springs with Flip Kit in the rear

- CPP Tubular Motor Mount perches

- Western Chassis Chevy / GMC Truck Tubular Transmission Crossmember

- Energy Suspension Transmission Mount

- Western Chassis Truck Trailing Arm Crossmember with Anti Squat Brackets

Frame was cut for a medium bed 6” rear and 9” in front. This will give a bed in between the long and short bed. In some of the pictures you will still see the original crossmembers, however they were replaced with the ones listed here. The new Trailing Arm crossmember makes it easy to change the rear suspension for trailing arms with springs or air bags. Included are Airmaxx dual solenoids, air tank & compressor.Truck had air bags in front when I got it.

ENGINE / Transmission

- Completely Rebuilt Chevy 350 SB

- Energy Suspension Polyurethane Motor Mounts

- ARP Motor Mount Bolts

- Completely Rebuilt GM 700R4 Transmission / Torque Converter

- Lokar 700R4 Shifter Assembly

- Lokar 32” Double Bend Radical Shifter

- ARP Torque Converter Bolts

- ARP Engine to Transmission Mounting Bolts

- Chevrolet Performance Deluxe Serpentine Drive Kit $899.97

* Belt (water pump, A/C, alternator, and power steering)

* Water Pump

* A/C Compressor

* Tensioner assembly

* Idler pulley

* Power steering pump

* Power steering reservoir

* Alternator, A/C and power steering pump bracket

* Power steering pump brace

* Power steering pump pulley

* Alternator

- Moroso Low Profile Oil Pan W/ New Oil Pick Up

- Fel-Pro One Piece Oil Pan Seal

- Brand New Holley 650 Carb

- Brand New Harmonic Balancer

- Brand New Edelbrock Elite Valve Covers

- Brand New Electronic Distributor

- Brand New Plug Wires

- Hedman Shorty Street Headers $183.97

- SBC 79 and Earlier Engine Oil Dipstick Stainless Steel

CAB / BODY

- Custom Hand Made Transmission Hump Tunnel

- Floor Pan, Left

- Cab Corner Patch Panel, Outer, Left

- Rocker Panel, Driver Side, Outer

- Rocker Panel, Driver Side, Inner

- Rocker Panel, Passenger Side, Outer

- Rocker Panel, Passenger Side, Inner

- Energy Suspension Cab Mount Bushing Cushion Kit W/ New Hardware

Cab was lifted off and new sheetmetal was welded to replace rosted sections. New Trans Hump was formed and welded in place. Interior and firewall was painted together with the dashboard. Door panels painted with the same Gold Flake as the dash. Floors were sealed with seam sealer and undercoated from the outside. Inside of the floors were primered and Sound Deadener was installed.

The bed sides and the steps were shortened 9” and now needs to be welded back together. The bed floor was almost completely rosted, so it needs to be fabricated. Anyways the original bed floor would not fit the C-notch. Also the tailgate was in bad shape and you will need a new one.

New parts included but not yet installed:

- E-brake Cables

- American Shifter 11” Transmission Mount Emergency Hand Brake Kit

- American Shifter Oval Emergency Brake Trim Ring With Hardware

- American Shifter Black Emergency Brake Boot

- Anco windshield wipers

- GMC 8 pc. Door Feltline Kit

- Door Opening Seals / Honda / Left + Right $96.57

- Door Sill Plate - 60-66 GMC $43.90

- Battery Hold Down $9.95

- Battery Tray Assembly $40.95

- Windshield Washer Jar $10.95

- Windshield Washer Jar Bracket $9.95

- Windshield Washer Pump $48.95

- Hood Bumper Kit - 62-66 $8.95

- Door Panel Screw SetStainless Steel $13.95

- Radiator Support Mounting Kit $21.95

- Front Fender to Cab Seals $17.00

- Fuel Tank Filler Neck Grommet $4.95

- Hood to Cowl Seal $9.95

- Inner Fender Seal Kit $43.90

- Radiator to Splash Pan Seals $5.95

- Radiator Support Side Seals $19.90

- Battery Hold Down Bolts – Stainless Steel $19.95

- Bed Mounting Pads $12.95

- Interior Handle Escutcheon Set $5.95

- Door Bumper Set $13.90

- 210pc. Front End Sheet Metal Hardware Kit

- Summit Auto Rear Bumper Bracket / Stepside 4pcs

- Auto Metal Direct - TriPlus Right Front Fender

- Front Fender Brace Right Front

- Front Fender Lower Repair Panel, Left

- POL Chevy / GMC Power Brake Booster / Master Cylinder with Proportioning Valve / Disc Brakes All Around

- American Autowire Wiring Harness, Classic Series, 18 Circuit $494.10

- Vintage Air SureFit Air Conditioning Kit, Complete $1187.88

- Ididit Retrofit Floor Shift Tilt Steering Column – Chrome $586.73

- Nu-Relics Power Window Conversion / Nu Crank Switches $582.95

- Set of yellow Headlights / 2pcs.

- Original Drive Shaft – NEEDS TO BE SHORTENED AND BALANCED

- Audio system with head unit, amp & subwoofer

NEEDS:

- Radiator

- Windshield rubber seal

- Rear window rubber seal

- Seats / Bench

- Carpet for the cab

- Rear bumper

- Rims & tires

I will help the buyer with shipping and even set it up trough Uship or other service providers. Buyer however is responsible for all shipping / Freight costs.
Buyer responsible for any and all shipping costs!I will pack and ship only after receiving the payment. The shipping price shown is only an estimate - buyer will pay for actual shipping cost only

Call me with any questions 954 864 0884