1968 Barracuda Fastback Race Car

Description

1968 Barracuda Fastback – CLEAR TITLE

Just brought out of heated storage about 2 weeks ago. It has been checked over, filled with fresh fluids and race gas, pre-lubed, fired and test driven on the street.

487 hp to the rear wheels. (only 13 passes since rebuilt engine and powertrain)

Race car was built according to the Mopar Engine and Chassis books using MoPar Performance parts.

It has not been raced since 1994 but, as mentioned above, has been in heated storage for all that time.Of course, it is still stored in a dry garage, just no longer heated.The last runs posted were 11.04, 11.06 and 10.96.All at 122+ mph.Due to the time which has passed since it was last raced, I would recommend replacing all four tires and some minor updates to NHRA rules may be required.I have taken these factors into account when pricing.

I have extra parts which will go with the car.Lots of trims pieces, etc. The body has no major damage and the paint has several small scratches and minor dings but is in, overall, good shape.As the car has been raced most of its life, I don’t’ see any rust through in the normal problem areas. If you are not racer, it could be fairly easily restored back to nice street trim.Then you could sell off the race equipment to put into restoration parts.As a buyer, you have choices.

Now for some details:

Engine: 1967 440 RB engine, bored .060 over, stock stroke, estimated 456 c.i.d.Internally balanced, SFI vibration damper, 11.5/1 compression, hi-volume Mopar Performance oil pump, enlarged and extended oil pickup tube (1/2”). Milidon deep sump, 8 qt oil pan.MoPar Performance M1, single plane intake manifold with 750 cfm 3310-3 Holley 4-Barrel set up to Stage 3 level by the Carb Shop, Ontario, CA.

General Kinetics camshaft, 308-degree duration, 0.580 lift, centerline 106-108 degrees, mechanical lifters with Isky adjustable rockers.MoPar Performance black wrinkle finish aluminum valve covers.

MoPar 2843906 HP heads with 2.14 intake, 1.84 exhaust valves and matched ports.

Fuel:Holley “blue” fuel pump and matching Holley fuel filter.Holley fuel regulator.External fuel pressure gauge.Rear mounted enclosed 3-gallon moon fuel tank.Fuel lines are stainless braided hose and metal tubing with AN connectors.

Ignition:Mopar chrome box electronic ignition. Accel Hi-Performance Super Coil.

Cooling:Heavy duty 4-core radiator.Fiberglass flex fan and temp controlled electric fan.

Exhaust:Hooker Super Comp fender well headers.2” x 40” primary tube length, 12”x 3 ½” collector.

Transmission: Torqueflite 727-B.SFI flex plate.Turbo Action 3800 9 ½” “J” converter.Hurst Quarter Shifter, reverse pattern.External, high capacity trans fluid filter in addition to the internal filter.External trans cooler.

Rear end:Dana 60 built by Randy’s Ring and Pinion.Power Lock differential with 4.11 Pro Gears and 3” wheel studs.A spare set of 4.86 gears go with the car.Super Stock springs moved into frame rails to accommodate narrowed rear end.11” drum brakes.

Front suspension:318 torsion bars with 90-10 adjustable shocks.Front drum brakes with line lock.

Chassis:K-frame configured for Milidon deep pan and reinforced, solid engine mounts.Sub-frame connectors.Tubbed rear wheel wells to fit the MT 29.5-11.5x15 slicks.Cragar Super Lite wheels all around.8-point, padded roll cage w/braced driver’s seat.5-point driver’s harness and a pair of Fiberglass front seats.

Body:Stock all steel except has a lift off fiberglass hood with Hemi style scoop.Deck lid is gutted stock steel with “hood pin” attachments.Car weighs 3010 lbs. without driver.

Electrical:Airheart gauges and Monster Tach.Hurst Line-Loc.Emergency electrical shut-off switch.Wiring includes fuse block, dash switches for arming ignition system, water and fuel pumps, tail lights and push button starter switch.Rear mounted battery (not included) and enclosed in NHRA approved enclosure.

I have described the car as best as I can but, if you have any questions, please message me and I will get the answer to you.

Shipping is the buyer’s responsibility, but I will help with what I can at this end.The car is for sale locally and reserve the right to close the auction early.