1970 Pontiac GTO Coupe, Disassembled Project w/Most Parts, Auto, Rallies, +

Description

For sale: Selling a group of items for a friend that is a local businessman in our town. All of these items are being sold as is and as described, cleaning out items that have accumulated through the years! All are being sold on a one-time listing with no reserves! Each is selling as is and with no warranty or guarantee and no returns. Just a good group of eBay deals!*****

This sale is for another antique car - it is a 1970 Pontiac GTO Coupe - this is a project as it is disassembled and will needrestoration as well as putting it back together. This is a non-matching numbers car, see details. Previous owner put Judge stickers on the car - it is not a judge, but could be a clone if desired. Car codes out to a 70 GTO coupe, assembled in Arlington, TX, has a V8 motor option, is a 2 door hardtop, a Palomino Copper Poly upper and lower body, and asaddle interior. Car has bucket seats, manual windows, power steering and brakes, no tach option, etc...*****

Codes are: Casting: 483677back of motor, behind passenger head (1971 455 motor); Front left of block is #003468 and C below it; Intake: P4B Edelbrock Aluminum intake (close replacement for stock, low rpm focus); Carb: 1406 0405 Edelbrock (600 cfm square bore); on passenger head is 8233 and 4X and GM 6; Distributor: 1103314-9 A-9 (late 1970s distributor); Dist. module: 9908A17 (late 1970s module); andTransmission: 76-0A-31134 (tag on side, unsure of details).

Carhas been instoragefor a number of years, prior to that it sat in a body shop that disassembled it and did no work to the car - other than losing the hood, breaking the front window and losing the rear window. We also are missing the chrome moldings around front and back windows. We have quite a pile of parts that were retrieved from the body shop - we think it is fairly complete, but there may or may not be all parts to the car present. From going through the parts, I can tell that the carb and intake have been replaced (Edelbrock), the distributor was changed toa different distributor, and the interior vinyl inserts have all been changed to velvet or velour like material as inserts to the outside original vinyl of the seats. I also noticed that the radiator cover (part over the radiator and shroud) is missing. Car will obviously need a bit of work - the frontend is currently held on the car with a strap, looks like the inner fender wells are missing, that the front end assembly has been disconnected and is just sitting on the frame. The rubber bumper in the front has quite a bit of damage to its surface and myneed restoration or replacement. There is rust on the car, wheel wells and lower quarter panels may need patches or replacement. Car has rally wheels with older white letter tires that are showing age and rot. Interior-wise there is no carpet, the floor pans look solidbut may need some patching and the dash looks complete, but does have some condition issues depending on what you want todo with the car. The owner did drive the car to the shop years ago, although it had a weak transmission, unknown as to condition of the motor, obviously not original to the car. Title isclear from the previous owner and will be transferred to the new owner with an additional bill of sale.There is no paperwork as to manuals, data plates etc... just what you see in the pictures. We are selling it as is and as shown - with no warranty or guarantee.Selling it one time withno reserve!*****

This is a local pickup item due to size and weight. It doesnot currently run, soyoumight want to bring a trailer to pick this unit up.Additional space will be needed for all the parts to the car. Buyer is responsible for transportation arrangements and costs. We have folks here to help load some, not to do all the work, but to help you load it. Item is located in Watseka, IL (zip 60970) which is about 1.5 hours south of Chicago, IL and about 20 miles west of the Illinois and Indiana state line. Item is located in a small town at a local car dealership's storage facility. Deposit of $1000 due within 3 days of sale's end, balance due by Paypal within seven days after depositing. Pickup should occur within a week after full payment. Payment is by Paypal in full prior to coming for the unit, once paid, call to arrange timing for pickup and delivery. If car is not picked up, item is relisted and monies are not returned - we simply want some one to buy the unit and pick it up in a timely manner. The sale is not an invitation to come and wrench on an item and decide to buy or not buy and the sale is not an invitation to take some parts and leave us the rest. Selling the complete unit in the condition shown. If you have questions, contact Dr. Brian through eBay and I will get you the answers to the best of my ability and the owner's ability. Thanks for looking!*****