1965 Toyota FJ40

Description

1965 Toyota FJ40 Landcruiser
Engine is a Chevy 350 small block with 4 Barrel Edelbrock Carb. SM465 4 speed transmission. NP205 Transfer case.
Frame has been fully reinforced boxed and trussed. Dana 44 front axel with spartan locker and Spicer locking hubs. GM 14 bolt in the rear with 4.10 gears and limited slip.
This machine could handle a lot more power, the frame and drive train is overbuilt to handle just about whatever you want to throw at it. I planned to drop an LS engine in.
The 4 x 4 is currently not connected to the front axel, I have an additional Dana 44 axel with disk brakes and the 4.10 gears that can be swapped in which will be included in the sale. It has upgraded power steering to accommodate the beefier axles. Front disk, drum rear. I will include the driveline to link the front axel to the transfer case.
I drive this on the freeway at 65 MPH running at around 2000-2100 rpm with the current 35" tires on it. Lots of wheel travel/clearance. It tracks perfectly straight and is easy to steer even with the big axles and tires.
The soft top is like new. The soft full doors are in very good condition. I also have 2 ea full period correct metal doors with wing windows for it, 2 ea 1/2 vinyl doors and a bikini vinyl top for it, 2 ea 1/2 metal doors (no glass or frame) and a recently acquired hard top with good seals and glass. I have the original headlight bezel, a back seat that needs reupholstered, a factory ignition switch and key, a good windshield wiper/motor for the passenger side, original instrument cluster and a few other parts. Full solid roll cage installed.
It has new 17inch steel black wheels with 25" BF Goodrich KM2 tires with 95% or better tread.All of the auxiliary lights work very well including the bumper mounted driving lights, 2 very bright Rigid pods at the base of the windshield on each side, a rear mounted spot light on the roll cage and the upgraded headlights. It has an aftermarket very heavy duty front and rear bumper with a custom heavy duty cage to carry the matching spare wheel and tire on the back. The front bumper also has a Legendary WARN 8274 winch mounted.
Interior has full gauges aftermarket installed. The speedo currently doesn't work and the gas gauge isn't connected. The original instrument cluster at the steering wheel will be included. It is currently set up with a kill switch and push button start. It has a battery disconnect switch under the hood if it has to sit. Has a small exhaust leak on the drivers side manifold-just developed.
The frame is rust free-very solid, fully reinforced and painted not long ago. Body has been rubbed in a few places. Front fenders were reinforced at some point before I had it, body work over the reinforcement wasn't perfect but new fenders if you wanted are inexpensive and easy to put on. The hood has a couple of light dents. Floors are solid. Paint is OK, there is light surface rust in a few places. I don't have the full history on the vehicle. I purchased it for the most part as is. I taught my son how to drive a stick in it and have driven it this spring summer for cruising fun mainly. The wiring is a little on the "cut and paste" side done by the previous owner. Everything seems to work ok but I ordered a complete new wiring harness and fuse panel from Jegs that will be included. It is brand new-300$. Drivers side windshield wiper works but passenger side doesn't. I sourced a good motor to replace it which will be included. Also included is a CB radio mounted to the front of the center console. The CD head unit is mounted in the roll cage overhead.
I don't know the actual mileage.
This vehicle is stored in my garage currently. I have it licensed through June of 2018.
Buyer is responsible for shipping. I can store the vehicle for up to 2 weeks with full payment made. Full payment due within 7 days. Immediate deposit due of 500$ upon notification of wining bid/confirmation of purchase.
Ask any questions, I'll do my best to answer.