Classiccarsexport.com

1987 PORSCHE 944S3 with a 968 vario-cam engine !!

  • Price: Ask a price!
  • Condition: Used
  • Make: Porsche
  • Model: 944
  • Type: Coupe
  • Year: 1987
  • Mileage: 126,000
  • VIN: wp0aa0942hn453123
  • Color: Black
  • Engine size: 4cyl 3.0 L
  • Number of cylinders: 4
  • Power options: Power Windows, Power Seats
  • Fuel: Gasoline
  • Transmission: Manual
  • Drive type: RWD
  • Interior color: black, burgundy
  • Drive side: Left-hand drive
  • Options: Leather Seats
  • Vehicle Title: Clear
  • Location: Chicago, Illinois, United States

Description

Selling my fully completed projec, the vin belongs to a 1987 Porsche 944s body with a fully operational 1993 Porsche 968 4cly 3.0L vario-cam engine on a 1987 turbo late offset suspension with a 16 S 5 sp.ed manual transmission. Every part was purchased separately to build this conversion. One of the pictures contain GT headlights are not install car only comes with oem pope up lights.
ANY OFFERS ON THE ENGINE 1993 PORSCHE 968 4CYL 3.0 VARIO-CAM WITH HARNESS AND ECU 90,000 MILES working engine without harness and ecu is worth 3,500 not many 968 in USA
BODY : INTERIOR/EXTERIOR
The 1987 Porsche 944s body exterior has been completely redone my way I have changed the front to all turbo parts fenders,hood,nose,bumper,fog lights and clear signal lens.The rear of the car is same no changes. Interior is basically all the same except for the burgundy seats are fully power on both sides and the door panels are 968 with working speakers. The center underneath the radio has been modified with a key battery kill switch and a ignition switch for the engine. The mirrors and windows work on both sides of the doors with no automatic door lock option. The sunroof is not assembled to work needs a motor. The body all around has been painted from burgundy to black no rust some scratches here and there.
SUSPENSION
Front 1987 turbo late offset spindles L/R with control arms. New front rotors,pads and bearings with seals. Front oem sachs struts. Front stabilizer bar weltmeister 24mm, rebuild rack and pinion with new tie rods and a linkage knuckle intermediate shaft. Rear koni adjustable shocks, rear stabilizer bar weltmeister 22mm with adjustable drop links. All 4 piston caliper brakes all around.
ENGINE
1993 Porsche 968 4 cyl inline 3.0L vario-cam with replaced valve cover gasket, spark plugs and complete timing done a year ago from that time the car has not been driven since the engine was installed to the body. This year I worked on the completing the bodies interior and exterior. The engine starts wo no problems using 15w40 non syn oil, new Meyle motor mounts replaced. New upper and lower radiator hoses. I don't know the exact mileage of the engine its around 80-90 thousand miles.
ENGINE COMPRESSION READING ON ALL CYLINDERS please see pictures
DRIVE - TRAIN
1987 S 16 valve transmission code (AGP07106) 98 thousand miles, with fresh 80w90 gear oil, 1987 S clutch, rebuild Bosch starter, new axle bolts
RIMS - TIRES
1993 968 16'' rims oem 5 spoke, New front Milestar tires 205/55r/16, Used tires 50% 245/55r/16
OIL COOLER
Replace oil separator o-rings, oil cooler housing gasket with oil cooler sleeve and seals, New aeroquip 250psi hoses with 2 X M22X1.5 10an 90deg oil cooler fittings adapters setrab.
FUEL DELIVERY SYSTEM
New mann fuel filter, and fuel lines going from the tank thru the fuel pump,filter and towards the engine. Fuel line kit update 2 ft aeroquip 250psi 3/8'' and 1/4'' socketless hoses with 8mm bite ring 3/8'' and 1/4'' push one adapters and heat sleeve 5/8'' x 50', fuel injection seal kit.
OTHER NEW ITEMS REPLACED
Battery 79cca, custom high pressure clutch hose,power steering reservoir hoses, a/c delete bracket, alternator voltage regulator, rear 4 x 6 infinity speakers
BAD
Front windshield cracked on the lower left corner
A/C is not installed up to the engines firewall
Sunroof is not complete mechanics and elec motor
ANY OTHER QUESTIONS PLEASE GIVE ME A CALL DO NOT TEXT M, I WILL NOT RESPOND TO ANY TEXTING 773-431-0173